INDUSTRIAL ANCHOR SYSTEM


FLAT SIDE


HOOK SIDE


INSTALLED IN CONCRETE


ATTACHED TO AUGER


DRAIN HOLE IN BASE

Safe T Anchors are easy to access and are a quick tie-down point to secure any type of ground areas were securing your equipment, tools or your "expensive toys" as needed. Our unique design of the anchorís top allows it to pivot from hook-up to becoming completely flat. This makes the entire surface of anchors flush to ground level without removing them and so you can drive vehicles over it, cut the grass, prevents tripping of personnel, being a hazard to cleaning machines or snow removal equipment. This, of course,all depends on your individual installation and where you need to install it to secure your items.

Safe T Anchors are patented in the USA 10,428,483 and is patent pending 3,000,9302, in Canada.

Model T-2000

• Made of steel, zinc coated for corrosion resistance.
• Retaining strength of 2,800 pounds.
• Adjustable height.
• Height: 3.75” (9.52cm).
• Diameter: 3.5” (9.14cm).
• Weight: 6 pounds (2.72kg).
• Includes a locking screw.

Model T-5000

• Made of steel, zinc coated for corrosion resistance.
• Retaining strength of 5,000 pounds.
• Adjustable height.
• Height: 3” (7.62cm).
• Diameter: 6” (15.24cm).
• Weight: 8 pounds (3.64Kg).
• Includes a locking screw.

Can be installed in cement or on auger type pilings.
Easy installation instructions are included.

Other sizes are available. Anchors can be custom manufactured to your specifications for more retaining strengths as needed and tested/verified by certified laboratories.

Use them for many commercial, industrial and residential uses, such as:

• Flat beds
• Trucks
• Trailers
• Docks
• Warehouse storage
• Outdoor storage
• Test holds
• Crane holdings
• Animal retainers
• Motorcycles
• Bicycles
• Lawn equipment
• Snow blowers
• Household furniture against winds
• Mobile homes
• Greenhouses
• Children's outdoor game structures
• Boats docks
• Vehicle covers
• Fences
• Cables
• Tarps
• Swing sets
• Campers
• Job site equipment
• Truck bed anchors
• Anti theft hooks
• Tents
• Overhang hooks
• RV’s
and more...

Available accessories:

T-24 Auger type piling for installations into the ground:
24” long x ¾” shaft x 4” diameter piling, screwed to the bottom hole of the anchor.
(1 bolt ¾” included)

TA-3000 - Special adapter for industrial metal post commercial helical piles

• Made of steel, zinc coated for corrosion resistance
• 1- Adapter, 6” (15.24cm) diameter x 1½” (3.81cm) thick,
• 4 - Bored Holes on bottom set to fit industrial augers (see picture)
• 4 – Hex head bolts, ¾” (1.9cm) x 1½” (3.81cm) long
• Weight 3 lbs (1.36kg)

United States patent number 10,428,486 - Canada patent pending 3,000,932
linkedIn